我国螺旋度的研究及应用   总被引：18，自引：6，他引：18  

岳彩军  寿亦萱  寿绍文  漆梁波  施红 《高原气象》2006,25(4):754-762

对自20世纪90年代以来至今国内关于螺旋度理论及应用研究工作进行了较系统地总结,将螺旋度归类为垂直螺旋度、水平螺旋度及完全螺旋度,同时又将垂直螺旋度划分为局地垂直螺旋度和积分垂直螺旋度,详细介绍并给出了每一类螺旋度的计算表达式以及其在天气诊断分析中的应用状况,对螺旋度的应用研究现状进行了简单地分析与讨论,最后展望了未来螺旋度研究与应用的发展方向。  相似文献   

Influence of the Kunlun Mountain Ms8.1 Earthquake on Horizontal Crustal Deformation in the Sichuan and Yunnan Area     

Yang Guohua 《中国地震研究》2007,21(3):269-280

In order to track the space-time variation of regional strain field holistically(in a large scale) and to describe the regional movement field more objectively,the paper uses a nonlinear continuous strain model focused on extracting medium-low frequency strain information on the basis of a region with no rotation.According to the repeated measurements(1999～2001～2004) from GPS monitoring stations in the Sichuan and Yunnan area obtained by the Project of "China Crust Movement Measuring Network",and with the movement of 1999～2001(stage deformation background) as the basic reference,we separated the main influencing factors of the Kunlun Mountain M-S8.1 earthquake in 2001 from the data of 2001 and 2004,and the results indicate:(1) the Kunlun Mountain M-S8.1 earthquake has a discriminating effect on the Sichuan and Yunnan area,moreover,the deformation mode and background had not only certain similitude but also some diversity;(2) The movement field before the earthquake was very ordinal,while after the earthquake,order and disorder existed simultaneously in the displacement field;The displacement quantities of GPS monitoring stations were generally several millimeters;(3) The principal strain field before earthquake was basically tensile in an approximate EW direction and compressive in the SN direction,and tension was predominant.After the earthquake,the principal strain field in the Sichuan area was compressive in the EW direction and tensile in the SN direction,and the compression was predominant.In the Yunnan area,it was tensional in the NE direction and compressive in the NW direction,and tension was predominant;(4) The surficial strain before the earthquake was dominated by superficial expansion,the contractive area being located basically in the east boundary of Sichuan and Yunnan block and its neighborhood.After the earthquake,the Sichuan area was surface contractive(the further north,the greater it was),and south of it was an area of superficial expansion.Generally speaking,the Kunlun Mountain M-S8.1 earthquake played an active role in the accumulation of energy in the Sichuan and Yunnan area.Special attention shall be focused on the segment of Xichang-Dongchuan and its neighborhood.  相似文献   

Importance of advective zone in longitudinal mixing experiments     

James Shucksmith  Joby Boxall  Ian Guymer 《Acta Geophysica》2007,55(1):95-103

One-dimensional Fickian dispersion models such as the advection diffusion equation (ADE) are commonly used to analyse and predict concentration distributions downstream of contamination events in watercourses. Such models are only valid once the tracer had entered the equilibrium zone. This paper compares previous theoretical, experimental and numerical estimates of the distance to reach the equilibrium zone with new experimental values, obtained by examining the change of skewness in a tracer profile, downstream of a cross-sectionally well mixed source. Closer agreement was found with Fischers’ theoretical estimate than prior experimental and numerical studies.  相似文献   

Turbulent fluxes from Helipod flights above quasi-homogeneous patches within the LITFASS area     

Jens Bange  Thomas Spieß  Marcus Herold  Frank Beyrich  Barbara Hennemuth 《Boundary-Layer Meteorology》2006,121(1):127-151

Turbulent fluxes of sensible and latent heat were measured with the helicopter-borne turbulence probe Helipod over a heterogeneous landscape around the Meteorological Observatory Lindenberg during the STINHO-2 and LITFASS-2003 field experiments. Besides the determination of area-averaged heat fluxes, the analysis focused on different aspects of the response of the turbulent structure of the convective boundary layer (CBL) on the surface heterogeneity. A special flight pattern was designed to study flux profiles both over quasi-homogeneous sub-areas of the study region (representing the major land use types—forest, farmland, water) and over a typical mixture of the different surfaces. Significant differences were found between the heat fluxes over the individual surfaces along flight legs at about 80 m above ground level, in agreement with large-aperture scintillometer measurements. This flux separation was still present during some flights at levels near the middle of the CBL. Different scales for the blending height and horizontal heterogeneity were calculated, but none of them could be identified as a reliable indicator of the mixing state of the lower CBL. With the exception of the flights over water, the latent heat flux measurements generally showed a larger statistical error when compared with the sensible heat flux. Correlation coefficients a nd integral length scales were used to characterise the interplay between the vertical transport of sensible and latent heat, which was found to vary between ‘fairly correlated’ and ‘decoupled’, also depending on the soil moisture conditions.  相似文献   

Numerical simulation of groundwater flowing to horizontal seepage wells under a river   总被引：6，自引：0，他引：6  

Wei Wang  Ge Zhang 《Hydrogeology Journal》2007,15(6):1211-1220

A horizontal seepage well, consisting of an interconnected vertical well, galleries, chambers and small-diameter radiating bores, is used to acquire relatively clean water that has been filtered through natural alluvial deposits in a riverbed. It has wide application, especially in arid and semi-arid areas. The lack of calculation formulae or models for horizontal seepage wells, up until now, has resulted in several false applications. Based on the analysis of groundwater flow characteristics, it has been concluded that several flow regimes coexist and hydraulic head loss exists in the horizontal seepage well. To avoid the difficulty of confirming the flux or head distribution in such a complex system, the model boundary of the whole horizontal seepage well has been moved to that of just the vertical well, and the well-aquifer system was treated as a heterogeneous medium, where the horizontal seepage well itself is a highly permeability medium. A mathematical model has been developed, based on the coupled seepage-pipe flow, by the introduction of equivalent hydraulic conductivity according to different flow regimes. Then a three-dimensional finite difference numerical model, based on the mathematical model, was developed and applied to a horizontal seepage well in China. The numerical model verified the groundwater flow characteristics of the horizontal seepage well. An erratum to this article can be found at  相似文献   

Study of a model for correcting the effects of horizontal advection on surface fluxes measurement based on remote sensing     

《中国科学D辑(英文版)》2006,(Z2)

As well known, the methods of remote sensing and Bowen Ratio for retrieving surface flux are based on energy balance closure; however, in most cases, surface energy observed in experiment is lack of closure. There are two main causes for this: one is from the errors of the observation devices and the differences of their observational scale; the other lies in the effect of horizontal advection on the surface flux measurement. Therefore, it is very important to estimate the effects of horizontal advection quantitatively. Based on the local advection theory and the surface experiment, a model has been proposed for correcting the effect of horizontal advection on surface flux measurement, in which the relationship between the fetch of the measurement and pixel size for remote sensed data was considered. By means of numerical simulations, the sensitivities of the main parameters in the model and the scaling problems of horizontal advection were analyzed. At last, by using the observational data acquired in agricultural field with relatively homogeneous surface, the model was validated.  相似文献   

西北地区近期地壳水平运动与构造变形特征   总被引：3，自引：0，他引：3  

张希  刘文义  王双绪  王文萍  张晓亮  崔笃信  薛富平 《中国地震》2006,22(1):43-55

利用截止2004年的西北地区GPS和跨祁连-龙首山构造带的红外测距观测资料，借助最小二乘配置、弹性块体边界负位错模型及单一力源反演，研究昆仑山口西8．1级大震前后西北地区水平形变应变场的动态演化特征；尤其是大震3年后，即当前的构造形变与应力场态势；获取活动块体及其边界断裂上可能反映中强以上孕震背景的高应变能积累区、段，以及可能的潜在震源。结果表明：青藏块体北缘地区经8．1级大震后的短期松弛和调整，目前正在恢复印度板块北东向碰撞推挤背景场的主控作用。而北天山构造带中段及其与西段的交汇区、南天山构造带中西段及其与西昆仑构造带的交汇区、阿尔金断裂中段、祁连山构造带中东段及其与海原断裂的交汇区、西秦岭北缘断裂与庄浪河断裂东南延伸线的交汇区域等具有相对高应变能积累背景；临泽与海原这两个地区也反映一定程度的应变能积累状态。  相似文献   

2007年初一次雪后大雾天气过程分析   总被引：1，自引：1，他引：1  

曹治强  方翔  吴晓京  李小龙 《气象》2007,33(9):52-58

大雾天气是主要的灾害性天气之一。利用多种观测资料和NCEP再分析资料,分析了2007年1月15日华北和黄淮地区的雪后大雾天气产生的天气背景及其形成的温湿条件和层结特征。结果表明:在这次大雾天气发生时,亚欧大陆中高纬度的环流形势为两槽一脊型,中纬度无明显冷空气活动,南支气流较为平直,天气形势比较稳定。华北和黄淮地区位于入海高压的后部,近地面层有弱的东北风或偏东风,即有利于海洋上暖湿气流的平流输送,又不至于破坏大雾形成的温湿条件。同时,大气层结是绝对稳定的,低层有深厚的逆温层,当暖湿空气平流到温度较低的下垫面上时冷却而形成雾,因而这次大雾天气属于典型的平流雾。这种形势的稳定维持,造成了这次持续时间较长的大范围的大雾天气。另外,华北和黄淮较低的海拔高度,有利于暖湿空气的平流进入,也是大雾形成的重要因子。  相似文献   

The numerical solution of the Advection-Dispersion Equation: A review of some basic principles     

Steve Wallis 《Acta Geophysica》2007,55(1):85-94

The simulation of solute transport in rivers is frequently based on numerical models of the Advection-Dispersion Equation. The construction of reliable computational schemes, however, is not necessarily easy. The paper reviews some of the most important issues in this regard, taking the finite volume method as the basis of the simulation, and compares the performance of several types of scheme for a simple case of the transport of a patch of solute along a uniform river. The results illustrate some typical (and well known) deficiencies of explicit schemes and compare the contrasting performance of implicit and semi-Lagrangian versions of the same schemes. It is concluded that the latter have several benefits over the other types of scheme.  相似文献   

A One-dimensional Ensemble Forecast and Assimilation System for Fog Prediction     

M. D. Müller  C. Schmutz  E. Parlow 《Pure and Applied Geophysics》2007,164(6-7):1241-1264

A probabilistic fog forecast system was designed based on two high resolution numerical 1-D models called COBEL and PAFOG. The 1-D models are coupled to several 3-D numerical weather prediction models and thus are able to consider the effects of advection. To deal with the large uncertainty inherent to fog forecasts, a whole ensemble of 1-D runs is computed using the two different numerical models and a set of different initial conditions in combination with distinct boundary conditions. Initial conditions are obtained from variational data assimilation, which optimally combines observations with a first guess taken from operational 3-D models. The design of the ensemble scheme computes members that should fairly well represent the uncertainty of the current meteorological regime. Verification for an entire fog season reveals the importance of advection in complex terrain. The skill of 1-D fog forecasts is significantly improved if advection is considered. Thus the probabilistic forecast system has the potential to support the forecaster and therefore to provide more accurate fog forecasts.  相似文献